Children's toys no longer: a porcine model study of the lethality of modern air rifles.

AIMS: We observed modern spring-loaded air rifles reaching velocities similar to small-bore rifles, raising concerns about their potential lethality. After encountering two life-threatening thoracic injuries in our practice, we conducted a study to assess the injuries that a commonly available air rifle could cause in a porcine cadaver model. METHODS: We conducted shooting experiments from 5 and 10 metres away using a .22 calibre spring-loaded airgun, firing five shots into the anterolateral chest on the left side at both distances. Additionally, we repeated the experiment with ten shots into 10% ballistics gel behind an explanted chest wall to evaluate chest wall penetration reliability. RESULTS: Out of the ten combined shots, six resulted in lethal or potentially lethal injuries, including multiple cardiac injuries. Moreover, we observed chest wall penetration in 9 out of 10 shots, with an average penetration depth of 106mm. Non-life-threatening injuries appeared to be influenced by shot location rather than an inability to penetrate the chest wall. CONCLUSION: Our study raises significant concerns about the potential lethality of unrestricted air rifles in New Zealand. With muzzle velocities comparable to small-bore rifles, these firearms should be reconsidered in terms of regulation and possibly restricted to gun license holders.

Review of non-penetrating ballistic testing techniques for protection assessment: From biological data to numerical and physical surrogates.

Human surrogates have long been employed to simulate human behaviour, beginning in the automotive industry and now widely used throughout the safety framework to estimate human injury during and after accidents and impacts. In the specific context of blunt ballistics, various methods have been developed to investigate wound injuries, including tissue simulants such as clays or gelatine ballistic, physical dummies and numerical models. However, all of these surrogate entities must be biofidelic, meaning they must accurately represent the biological properties of the human body. This paper provides an overview of physical and numerical surrogates developed specifically for blunt ballistic impacts, including their properties, use and applications. The focus is on their ability to accurately represent the human body in the context of blunt ballistic impact.

Two Bullet Wounds, One Bullet: The Atypical Fragmentation of a .223 Caliber Ammunition.

ABSTRACT: As the fifth leading cause of death in individuals aged 1 to 64 years in the United States, forensic pathologists frequently encounter firearm-related deaths and are trained to approach these cases by utilizing information from the investigation, radiographs, and autopsy findings to discern the logical sequence of events that lead to death. We also emphasize the importance and utility of various factors such as bullet wound characteristics, type of ammunition used, and type of tissues involved in a forensic pathologist's determination of events and in medicolegal investigations. However, the unusual presentations of firearm-related deaths can cause confusion and even frustration when there are contradicting circumstances or findings at work. We present the case of a 61-year-old woman with an atypical pattern of 2 distinct irregular entrance gunshot wounds determined to be caused by a single projectile.

Effects of kinetic energy and firearm-to-target distance on fracture behavior in flat bones.

This research implements a fractographic approach to investigate the relationships between kinetic energy, firearm-to-target distance, and various aspects of fracture behavior in gunshot trauma. Gunshot experiments were performed on pig scapulae (n = 30) using three firearms generating different muzzle (initial) kinetic energies, including a 0.32 pistol (103 J), 0.40 pistol (492 J), and 0.308 rifle (2275 J). Specimens were shot from two distances: 10 cm (n = 15) and 110 cm (n = 15). Features evaluated in fractographic analysis such as cone cracks, radiating cracks, crack branching points, and circumferential cracks could be easily identified and measured in flat bones and allowed for statistical comparison of crack propagation behavior under different impact conditions. Higher-energy bullets produced more radiating cracks, more crack branching points, and longer fracture lengths than lower-energy bullets. Distance had no significant effect on fracture morphology at the distances tested. That quantitative measures of crack propagation varied with energy affirms that kinetic energy transfer is important in determining the nature and extent of fracture in gunshot wounds and suggests it may be possible to infer relatively high- versus relatively low-energy transfer using these features. Ranges obtained with the three firearms exhibited considerable overlap, however, indicating that other variables such as bullet caliber, mass, and construction influence the efficiency of energy transfer from bullet to bone. Therefore, fracture morphology cannot be used to identify a specific firearm or to directly reconstruct the muzzle (initial) kinetic energy in forensic cases.

Impact Location Dependence of Behind Armor Blunt Trauma Injury Assessed Using a Human Body Finite Element Model.

Behind armor blunt trauma (BABT), resulting from dynamic deformation of protective ballistic armor into the thorax, is currently assessed assuming a constant threshold of maximum backface deformation (BFDs) (44 mm). Although assessed for multiple impacts on the same armor, testing is focused on armor performance (shot-to-edge and shot-to-shot) without consideration of the underlying location on the thorax. Previous studies identified the importance of impacts on organs of animal surrogates wearing soft armor. However, the effect of impact location was not quantified outside the threshold of 44 mm. In the present study, a validated biofidelic advanced human thorax model (50th percentile male) was utilized to assess the BABT outcome from varying impact location. The thorax model was dynamically loaded using a method developed for recreating BABT impacts, and BABT events within the range of real-world impact severities and locations were simulated. It was found that thorax injury depended on impact location for the same BFDs. Generally, impacts over high compliance locations (anterolateral rib cage) yielded increased thoracic compression and loading on the lungs leading to pulmonary lung contusion (PLC). Impacts at low compliance locations (top of sternum) yielded hard tissue fractures. Injuries to the sternum, ribs, and lungs were predicted at BFDs lower than 44 mm for low compliance locations. Location-based injury risk curves demonstrated greater accuracy in injury prediction. This study quantifies the importance of impact location on BABT injury severity and demonstrates the need for consideration of location in future armor design and assessment.

Observing the fragmentation of two expanding bullet types and a full metal-jacketed bullet with computed tomography-a forensic ballistics case study.

Computed tomography (CT) may have a crucial role in the forensic documentation and analysis of firearm injuries. The aim of this forensic ballistics case study was to explore whether two types of expanding bullets and a full metal-jacketed bullet could be differentiated by inspecting bullet fragments and fragmentation pattern in CT. Three types of .30 caliber bullets (full metal-jacketed Norma Jaktmatch, expanding full-copper Norma Ecostrike, and expanding soft-point Norma Oryx) were test fired from a distance of 5 m to blocks of 10% ballistic gelatine. CT scans of the blocks were obtained with clinical equipment and metal artifact reduction. Radiopaque fragments were identified and fragmentation parameters were obtained from the scans (total number of fragments, maximum diameter of the largest fragment, distance between entrance and the closest fragment, length of the fragment cloud, and maximum diameters of the fragment cloud). The fragmentation patterns were additionally visualized by means of 3D reconstruction. In CT, the bullet types differed in several fragmentation parameters. While the expanding full-copper bullet Ecostrike left behind only a single fragment near the end of the bullet channel, the soft-point Oryx had hundreds of fragments deposited throughout the channel. For both expanding bullets Ecostrike and Oryx, the fragments were clearly smaller than those left behind by the full metal-jacketed Jaktmatch. This was surprising as the full metal-jacketed bullet was expected to remain intact. The fragment cloud of Jaktmatch had similar mediolateral and superoinferior diameters to that of Oryx; however, fragments were deposited in the second half of the gelatine block, and not throughout the block. This case study provides a basis and potential methodology for further experiments. The findings are expected to benefit forensic practitioners with limited background information on gunshot injury cases, for example, those that involve several potential firearms or atypical gunshot wounds. The findings may prove beneficial for both human and wildlife forensics.

Cutaneous skin defects overlying tangential gunshot wounds: A case series.

In examining deaths resulting from gunshot wounds, it is important to describe the wound pathway created by the projectile. Forensic pathologists must identify all entrance and exit wounds and account for all projectiles. Occasionally, confusion arises as to whether a skin defect represents an entrance wound or not, an exit wound, or some other type of wound. Herein, we propose the descriptor "bullet track skin defect" as a formal description for a superficial skin defect created along the pathway of a projectile within the body. Specifically, we define the "bullet track skin defect" as a partial- or full-thickness skin defect produced by a projectile traveling beneath the skin in a relatively tangential fashion as part of a wound pathway within the body. It is somewhat analogous to a traditional graze or superficial tangential wound, wherein the projectile traveling outside the body strikes the skin tangentially from above, without entering the body. However, the projectile is already traveling within the body with the bullet track skin defect, disrupting the skin tangentially from below rather than from above, without exiting the body. Although these defects are not a common presentation of gunshot wounds, they are certainly not rare. With this case series, we suggest that such defects may be referred to as "bullet track skin defects." Alternative language that can substitute for "bullet track skin defects" includes "bullet track skin wounds" or "bullet track cutaneous defects."

[Features of coarse calico damage by hollow-point bullets of ammunitions to a 12-gauge fire smoothbore weapon (12×70) under the conditions of remote shooting distance]. / Osobennosti povrezhdeniya byazevoi tkani ekspansivnymi pulyami patronov k ognestrel'nomu gladkostvol'nomu oruzhiyu 12-go kalibra (12×70) v usloviyakh neblizkoi distantsii vystrela.

The article presents the experimental study results of damaged clothes imitators' (coarse calico) features in consequence of shot by ammunitions with hollow-point bullet from a 12-gauge fire smoothbore weapon (12×70). The generation mechanism of coarse calico damage during wound of underlying biological human body's imitator by bullet and the factors influencing on mentioned process have been clarified using high-speed video recording.

[Distribution features of gunshot residue from hunting Steyr Mannlicher AUG-Z3 carbine on targets]. / Osobennosti raspredeleniya na mishenyakh produktov vystrela iz okhotnich'ego karabina Steyr Mannlicher AUG-Z3.

OBJECTIVE: To study the morphology of distribution of shot factors on white targets made of coarse calico at different distances. MATERIAL AND METHODS: The study was conducted on 57 experimental damages of targets made of cotton fabric, caused by shots from hunting self-loading Steyr Mannlicher AUG-Z3 carbine of.223 Rem caliber. The number of experimental firings equal 19 was done by 3 shots at the distance from close range to 250 cm. The examination of shot targets was carried out using the visual, metric, stereoscopic (Leica 125M microscope) methods, in ultraviolet rays (LUMATEC SUPERLITE M Series light). RESULTS: The nature and morphology of distribution of gunshot residue on targets' surfaces made it possible to establish close range firing zones. The nature in which soot is deposited during shot under the conditions of point-blank range and in the first zone of close range (up to 8 cm) allows to establish the position of weapon's transverse plane relative to the target basing on a specific blowout of a gas-powder jet from special design of flame arrestor. The performed experimental shooting from hunting self-loading Steyr Mannlicher AUG-Z3 carbine made it possible to determine the metric and morphological characteristics of the close range firing zones: 1 zone is equal a distance up to 8 cm; 2 zone - up to 30 cm; 3 zone - up to 100 cm from muzzle of weapon. The design features of Steyr Mannlicher AUG-Z3 carbine's flame arrestor allow to identify the type of weapon according to the morphological pattern of target's damage. The complex of obtained data makes it possible to determine the firing distance with high accuracy.

Heridas por proyectil de arma de fuego. Atipicidad en orificios de entrada y el fenómeno de ''cola de cometa": Reporte de caso / Gunshot wounds. Atypicality in entry holes and the "comet tail" phenomenon: Case report

El análisis de los orificios de entrada por proyectil de arma de fuego en una autopsia médico legal representa un importante papel en la determinación de la forma y causa de muerte en casos relacionados con armas de fuego. Su valoración puede proporcionar información valiosa sobre las características del arma utilizada, la distancia entre el arma de fuego y la víctima, entre otros factores que contribuyen a la investigación. El fenómeno de ''cola de cometa" observado en ciertos orificios de entrada es poco frecuente y conocido. Por lo anterior, el objetivo de este artículo es investigar las características y mecanismos de producción de los orificios de entrada con este fenómeno, proporcionando información sobre su formación, las posibles implicaciones y consideraciones médico legales a tomar en cuenta para su diagnóstico de esta causa de muerte. Se presenta un reporte de caso que destaca la descripción del fenómeno de ''cola de cometa" en una investigación forense de la vida real, proporcionando información valiosa sobre su utilidad y potencial para mejorar la precisión del análisis de heridas de bala. Se realizó revisión de artículos científicos, sobre orificios de entrada en heridas por proyectil de arma de fuego con el fenómeno de ''cola de cometa".

The analysis of firearm projectile entry holes in a medicolegal autopsy plays an important role in determining the manner and cause of death in cases involving firearms. The assessment can provide valuable information about the characteristics of the weapon used, the distance between the firearm and the victim, among other factors that contribute to the investigation. The ''comet tail" phenomenon observed in certain entry holes is rare and well known. Therefore, the objective of this article is to investigate the characteristics and mechanisms of production of the entrance orifices with this phenomenon, providing information about their formation, the possible implications, and medical-legal considerations to be taken into account for the diagnosis of this cause of death. A case report is presented highlighting the description of the ''comet tail" phenomenon in a real-life forensic investigation, providing valuable insight into its utility and potential to improve the accuracy of gunshot wound analysis. A review of scientific articles was carried out on entry holes in gunshot wounds with the "comet tail" phenomenon.

A Novel Paradigm to Develop Regional Thoracoabdominal Criteria for Behind Armor Blunt Trauma Based on Original Data.

INTRODUCTION: For behind armor blunt trauma (BABT), recent prominent BABT standards for chest plate define a maximum deformation distance of 44 mm in clay. It was developed for soft body armor applications with limited animal, gelatin, and clay tests. The legacy criterion does not account for differing regional thoracoabdominal tolerances to behind armor-induced injury. This study examines the rationale and approaches used in the legacy BABT clay criterion and presents a novel paradigm to develop thoracoabdominal regional injury risk curves. MATERIALS AND METHODS: A review of the original military and law enforcement studies using animals, surrogates, and body armor materials was conducted, and a reanalysis of data was performed. A multiparameter model analysis describes survival-lethality responses using impactor/projectile (mass, diameter, and impact velocity) and specimen (weight and tissue thickness) variables. Binary regression risk curves with ±95% confidence intervals (CIs) and peak deformations from simulant tests are presented. RESULTS: Injury risk curves from 74 goat thorax tests showed that peak deflections of 44.7 mm (±95% CI: 17.6 to 55.4 mm) and 49.9 mm (±95% CI: 24.7 to 60.4 mm) were associated with the 10% and 15% probability of lethal outcomes. 20% gelatin and Roma Plastilina #1 clay were stiffer than goat. The clay was stiffer than 20% gelatin. Penetration diameters showed greater variations (on a test-by-test basis, difference 36-53%) than penetration depths (0-12%) across a range of projectiles and velocities. CONCLUSIONS: While the original authors stressed limitations and the importance of additional tests for refining the 44 mm recommendation, they were not pursued. As live swine tests are effective in developing injury criteria and the responses of different areas of the thoracoabdominal regions are different because of anatomy, structure, and function, a new set of swine and human cadaver tests are necessary to develop scaling relationships. Live swine tests are needed to develop incapacitation/lethal injury risk functions; using scaling relationships, human injury criteria can be developed.

[War wounds and ballistics]. / Plaies de guerre et balistique.

Ballistic wounds, which historically concerned military populations, now also affect civilian practice. Terrorist attacks, urban violence and certain accidents have brought them into the daily routine of some French hospitals. Their frequency fully justifies the need for every health-care professional to be aware of the major issues involved in their management. In this section, we will describe the various penetrating ballistic wounds and their specific features. We will also rectify certain preconceived ideas that should not be peddled by healthcare professionals, in order to maintain a high standard of care.

[Ballistic injury, decaying wounds: the nurse at the heart of the long rehabilitation process]. / Lésion balistique, plaies délabrantes : l'infirmier au cœur du long parcours de réhabilitation.

Ballistic injuries are disabling. Its functional impact is determined by its trajectory. Whether the injury affects a limb that could jeopardize its preservation, visceral lesions or craniocerebral and vertebro-medullary wounds, the nurse is at the heart of multidisciplinary care to limit and compensate for the after-effects. Directed healing, appropriate analgesia, settling in, technical training for this new, modified body (stoma, self-catheterization, appliances, etc.) and support in accepting the injury are all part of the nurse's role in helping the injured person rebuild his or her life.

[Determination of the transfer of composite obstacle material by a gunshot projectile]. / Ustanovlenie fakta perenosa ognestrel'nym snaryadom veshchestva pregrady iz kompozitnykh materialov.

The aim of the experimental study was to establish the transfer of obstacle's composite material (foamed concrete, magnesite concrete, porcelain stoneware, galvanized sheet steel, wood particle board) by the gunshot projectile on firing by rounds sized 5.45´39 from the special shortened Kalashnikov assault rifle (AKS-74U). The shots were fired through various types of obstacles on different parts of animal carcasses from a distance of 3-5 m. Bullets and their fragments, extracted from the bullet trap or the biological target tissue, after appropriate processing were studied by «Leika M125¼ microscope, «Hitachi FlexSem1000 II¼ scanning electronic microscope and «Bruker Quantax 80¼ energy-dispersive X-Ray spectrometer. The conducted light microscopy of gunshot projectiles' fragments, which had overcome the obstacle, revealed the presence of a specific deformation of the bullet head at its penetration of each type of investigated obstacles. Scanning electron microscopy (SEM) and energy-dispersive X-Ray analysis (EDX) have revealed in each case the presence of obstacle particles overlaying over the entire surface of either deformed bullets or their fragments. The performed experimental study has shown that it is possible to establish the fact of person's gunshot injury through a composite obstacle by the use of SEM/EDX.

An Experimental Cold Gas Cannon for the Study of Porcine Lung Contusion and Behind Armor Blunt Trauma.

Behind armor blunt trauma (BABT) is a non-penetrating injury caused by the rapid deformation of body armor, by a projectile, which may in extreme circumstances cause death. The understanding of the mechanisms is still low, in relation to what is needed for safety threshold levels. Few models of graded kinetic energy transfer to the body exist. We established an experimental model for graded BABT. The cold gas cannon was air-driven, consisted of a pressure vessel, a barrel, and a pressure actuator. It required short training to operate and was constructed by standard components. It produced standardized expulsion of plastic projectiles with 65 mm and weight 58 g. Velocity correlated linearly to pressure (R 0.9602, p < 0.0001), equation Y = 6.558*X + 46.50. Maximum tested pressure was 10 bar, velocity 110 m/s and kinetic energy (Ek) 351 J. Crossbred male swine (n = 10) mean weight (SD) 56 ± 3 kg, were subjected to BABT, mean Ek (SD) 318 (61) J, to a fix point on the right lateral thorax. Pulmonary contusion was confirmed by physiological parameters pO2 (p < 0.05), SaO2 (p < 0.01), pCO2 (p < 0.01), etCO2 (p < 0.01), MPAP (p < 0.01), Cstat (p < 0.01), intrapulmonary shunt (Q's/Q't) (p < 0.05), and qualified trans-thoracic ultrasound (p < 0.0001). The consistent injury profile enabled for the addition of future experimental interventions.

Gunshot wounds in parenchymatous organs: the morphology mainly depends on the physical properties of the affected tissues.

In contrast to gunshot wounds in skin and bone, the medico-legal literature pays little attention to the appearance of bullet penetration sites in abdominal organs. It was only in 1983 that Metter and Schulz published an article entitled "Morphological features of gunshot wounds in the liver and spleen." According to their observations, the organs in question showed stellate tears at the bullet penetration sites resembling skin wounds from contact shots to body regions having a bony support. The study presented simulated the real conditions by means of test shots to composite models consisting of porcine organs embedded in ballistic gelatin. The ammunition used was pistol cartridges 9 mm Luger with full metal jacket round nose bullets. The shots were video-documented with a high-speed camera in order to record the bullet's travel through the target. In addition, the composite models fired at underwent CT examinations followed by a macroscopic assessment of the organs. The study confirmed the findings of Metter and Schulz with regard to the star-like appearance of gunshot wounds in the liver and spleen. Likewise, the kidney showed radiating tears originating from the bullet path, whereas the wound track in pulmonary tissue was tube-shaped and lacked additional cracks. The varying wound patterns in parenchymatous organs can reasonably be explained as a consequence of the respective viscoelastic tissue properties.

Investigation of the variability in the tool marks produced by modified blank firing pistols on fired 7.65 mm projectiles.

Firearms identification has an important place in forensic ballistic investigations since the weapons are widely used in criminal offences. Firearm examiners resolve many case files, through the use of automatic systems or comparison microscopes. Advanced forensic technologies like BALISTIKA helps to record and analyze non standard ballistic evidence. In today's world, with the ease of access to materials and production technique information, pistols modified from blank firers are frequently encountered as crime tools. In this study, the characteristics of 7.65 mm fired cartridge cases obtained by controlled shots from blank firing modified pistols were examined, and their detection performances were compared by means of the Balistika system. Although distinctive differences are not expected after successive test shootings, balistically important changes were seen after the use of blank firing modified pistols and the 3D imaging system proved to be useful in observing such differences. The analyses showed that the modifications in weapons lead to variation in the ballistic characteristics and reduce the accuracy of the detection performance, which may result in flawed forensic decisions. It was also found that the deviations in ballistic impressions of modified blank firing pistols were greater than that of standard fabricated and hand-made pistols. This unique study contributed to the forensic sciences literature by focusing on the impact of modified weapons on ballistic characteristics.

Analysis of free-fall bullet injury potential in the cranium via finite elements method.

The aim of this study is to analyze the injury potential of the free-falling bullet in the cranium, which is known as a tired bullet in the public, with the finite element method (FEM) In the study, as penetrant 9 × 19 mm FMJ bullets with vertical falling angle, adult human skull and brain tissue were discussed. The results of the analysis with the Finite element method, which is similar to the cases reported before, revealed that free-falling bullets as a result of shooting into the air can cause fatal injuries.

Ballistic impact of hollow-point ammunition on porcine bone.

Identifying failure mechanisms in skeletal tissue allows a deeper understanding of the effects of specific projectile impacts on bone. While ballistic trauma in flat bones is largely researched, knowledge of how long bones react to gunshot impacts is limited in the literature. The impacts of deforming ammunition appear to produce higher levels of fragmentation; however, these have not been studied in depth. This study compares the damage to femora bone by HP 0.357 and 9 mm projectiles constructed with both full and semi-metal jackets. Impact experiments were undertaken on a single-stage light gas gun involving the use of a high-speed video camera and full reconstruction of the bones to ascertain fracture patterns occurring in the femora. Higher degrees of fragmentation are likened to the presence of semi-jacketed HP projectiles than jacketed HP projectiles. The observations of external facing beveled edges are believed to be associated with the increased separation of the jacket and lead core of projectiles. Additionally, experimentation has shown that the amount of kinetic energy lost postimpact is likely related to the presence or the absence of a metal jacket on an HP projectile. The observed data, therefore, suggest that the composition, rather than the configuration, of a projectile affects the type and extent of the damage.

[Distribution of after-penetration gunshot wound zones]. / Raspredelenie zon zapregradnoi ognestrel'noi travmy.

Aim of this study is to establish the distance and spacing of gunshot wound in the conditions of after-penetration target location. The experimental studies series on shooting coarse colico targets located behind a triplex (car windshield) with record of results by a high-speed camera with a frequency of 1000 frames per second, followed by a study of the affected targets by routine and modern methods (scanning electron microscopy and energy dispersion analysis) were performed. Established results showed that fragments of projectile that overcame an obstacle and secondary projectiles have a rather stable zoning distribution behind an obstacle at a distance up to 2.5 m from the obstacle. The most informative diagnosis of an after-penetration wound distance zone is based on the character of the firearm projectile fragments dispersion, manifestation of lead particles thermal exposure from its sleeve and secondary projectiles fragments formed under the effect of shock wave superimposement in the obstacle material.